Obd auto doctor failed to initialize the adapter

#Obd auto doctor failed to initialize the adapter code#
#Obd auto doctor failed to initialize the adapter Pc#

#Obd auto doctor failed to initialize the adapter Pc#

Read the 8042 input port and disable the MEGAKEY Green PC feature. Start checking the 15 second on/off time. Start disabling DMA controllers 1 and 2 and interrupt controllers 1 and 2. Initialize CMOS RAM if the option to Initialize the CMOS RAM on every boot was set or the END key was pressed. Issue the Pin 23 and 24 blocking and unblocking command.Д¬heck if the END or INS keys were pressed during power on. The keyboard controller command byte is written. The initialization after the keyboard controller BAT command test is done. Start any initialization necessary after the keyboard controller BAT command test. The keyboard controller BAT command result verified. BAT command issued to the keyboard controller. The keyboard controller input buffer is free. Start any initialization required before the keyboard BAT command is issued.

Initialize the CMOS status register for date and time. Initialize the CPU and the CPU data area. Check performed for a soft reset or a power on condition.

#Obd auto doctor failed to initialize the adapter code#

If CTRL+HOME was pressed or the system BIOS checksum is bad, the BIOS jumps to checkpoint code E0h (boot block section). Check performed to detect if CTRL+HOME was pressed, and to verify the system BIOS checksum. The initialization code is copied to segment 0.Д¬ontrol is transferred to segment 0. Any OEM patches are executed, and then the stack is set.Д¬ontrol passed to the uncompressed code in shadow RAM at E000:0000h. Start of DMA controller initialization, keyboard controller BAT test, and memory refresh. Power on delay starts, and the initialization code checksum is verified. Read the AMIBOOT.ROM file, cluster by cluster.Дisplayed if the AMIBOOT.ROM file is not the correct size.ДЇlash ROM programming successful. Read and analyze the floppy disk FAT to find the clusters occupied by the AMIBOOT.ROM file. The AMIBOOT.ROM file is not in the root directory. Searching for the AMIBOOT.ROM file in the root directory. Internal cache memory enabled.Дisplayed if a read error occurs while reading the floppy disk in drive A. Interrupt vector table initialization starts.ДMA and Interrupt controller initialization starts.ДЇloppy disk drive controller and timer IRQs enabled. The onboard floppy controller, if available, is initialized.